Center Certification & Testing International
Project Introduction
The waterproof test is applicable to electrical and electronic products that may be subjected to flushing during transportation, storage or use. This water comes from heavy rain, wind and rain, sprinkler systems, wheel splashes, flushing or violent waves. The relevant specifications should specify whether the electrical and electronic products must work normally during the test, or whether they can only withstand the flushing conditions and remain intact.
For portable, outdoor and automotive electronics, there are waterproof test requirements, whether it is IEC, MIL or ETSI and SAE in the world have developed corresponding test requirements.
waterproof level
IEC/EN60529 waterproof is divided into 9 levels (level 0 ~ level 8), waterproof level (e.g.IPX4-waterproof level 4):
Level 0: Completely waterproof and unprotected
Level 1: Water dripping vertically should have no harmful effects
Level 2: When the vertical surface of the shell is inclined within 15°, the vertical dripping should have no harmful effects
Level 3: Water is sprayed within 60° of each vertical plane without harmful effects
Level 4: Splashing water in all directions of the housing without harmful effects
Level 5: No harmful effects by spraying water in all directions
Level 6: Strong water spray in all directions of the shell without harmful effects
Level 7: After being immersed in water of specified pressure for a specified period of time, the amount of water in the shell will not reach harmful levels
Level 8: According to the conditions agreed by the manufacturer and the user (should be harsher than Level 7), the water intake of the shell after continuous diving will not reach harmful levels
SRRC certification is one of the necessary conditions for products to enter the Chinese market for sale. It ensures that the wireless transmission characteristics of the wireless camera comply with national standards, avoiding communication problems caused by radio interference and ensuring the legality and compliance of the product.
FCC certification is a mandatory requirement for wireless device certification in the US market. Through FCC ID certification, wireless microphones can prove their compliance with US radio transmission standards, avoiding market bans or fines for violations. This is particularly important for products that hope to be sold in the US market.
KC certification ensures that products comply with relevant laws, regulations, and safety standards in South Korea, and is a necessary condition for smart door lock products to enter the South Korean market. KC certification covers wireless radio frequency, electromagnetic compatibility, and electromagnetic exposure. Strict testing and evaluation are required to obtain KC certification before products can be legally sold in the Korean market and gain consumer trust.
The waterproof test is applicable to electrical and electronic products that may be subjected to flushing during transportation, storage or use. This water comes from heavy rain, wind and rain, sprinkler systems, wheel splashes, flushing or violent waves.
Get a quote
Tik Tok
